entexs Mini 1
Capacity: 100 lbs per day
ethanol extraction
A complete processing solution from biomass input to crude and/or distillate. Features high-speed batch centrifuge with closed loop extraction routines utilizing ultra-cold temperature ethanol-based solvent enabling complete and high-quality cannabinoid capture without the need for winterization. Multi-stage filtration utilizes both particulate and color remediation with inter-stage pressure sensors and sight glasses for quality feedback.
Closed loop solvent recovery with desolventizing and decarboxylation routines enables full spectrum crude production under vacuum and reduced heat conditions with no need for roto-vaps or vac ovens for final oil processing. The multi-pass distillation module enables crude oil refinement utilizing terp strip and final distillation (2nd pass) routines. Complete system automation enables touch button control with tunable parameters for single-operator control. Closed loop process with integrated heated lines and pumps eliminates open pours and the need for external heat sources such as heat guns, tape, etc.
mini 1
system overview
Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.
Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.
High-speed batch centrifuge extraction module with closed loop tincture re-use routines, includes integrated heat exchangers, automated valves, and sensors for touchless control. Post-extraction clean solvent rinse increases extraction efficiencies.
Biomass staging & prep tray minimizes contamination and creates an ergonomic loading point.
RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.
Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.
Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.
Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.
Wiped Film (WFE) distillation module features a heated feed tank with a metering gear pump, 6" wiped film still with mechanical seal, cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU's maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -70° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.
mini 1
system overview
A
Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.
B
Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.
C
High-speed batch centrifuge extraction module with closed loop tincture re-use routines, includes integrated heat exchangers, automated valves, and sensors for touchless control. Post-extraction clean solvent rinse increases extraction efficiencies.
D
Biomass staging & prep tray minimizes contamination and creates an ergonomic loading point.
E
RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.
F
Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.
G
Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.
H
Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.
I
Wiped Film (WFE) distillation module features a heated feed tank with a metering gear pump, 6″ wiped film still with mechanical seal, cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU’s maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -70° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.
entexs
Technologies
Fully Automated
Extraction carousel with user configured routines and flow control from biomass to full spectrum crude, distillate and/or isolate.
No Winterization
Bypass this extensive and time-consuming step by controlling and maintaining solvent temperature during the extraction process below -50 °C.
Cloud Network
From your phone or computer, real-time and trend monitoring of extraction process can be leveraged to optimize efficiency.
Closed Loop System
Solvent temperature control maintains precise extraction temperature. Combined with our automation, complete control over final product states can be configured and run.
Hands-Free Technology
No touch process throughout the extraction process eliminates potential reduced efficiencies, compromised quality, increased labor and safety risks.
Heated and Jacketed Lines
Heated and jacketed lines in extraction systems maintain consistent temperatures, preventing solidification or degradation of sensitive substances. This technology enhances extraction yields, quality, and streamlines operations by eliminating external heating devices
In-Line Sample Test Ports
In-line sample test ports enable direct sampling of substances from within the system while maintaining a vacuum environment. This feature allows for real-time quality checks and process monitoring without disrupting the extraction process or compromising the vacuum conditions, ensuring accuracy and efficiency in product testing.
entexs
Complete Process
Our systems are designed for optimization on each of your processes.
mini 1
specifications
BATCH RATE
Cooling Method: Low Temp Chiller
Throughput Capacity: Up to 10lb/batch
Temperature Range: -60° for extraction to +200° C for distillate production
ELECTRICAL SPECIFICATIONS
Voltage: 208/230/460V (Configurable at time of order)
Electrical Rating: C1D2 Minimum
Power: 60 kW total
MECHANICAL SPECIFICATIONS
Footprint: 25’W x 6’D x 8’H (total system footprint)
Temperature Rating: -60° to +200° C
Pressure Rating: Full Vacuum to Atm.
Solvent Holding Volume: 55 gal working volume
HMI Interface: Remote Touch Panel
Controller: Industrial PLC UL Listed Components
mini 1
Gallery
Ethanol
Extraction
Subscribe to our
Newsletter
modules
accessories
- Email: info @ entexs.com
- Toll Free: (888) 960-3689
- 3720 Trade Way, Cameron Park, CA 95682, USA
- ENTEXS is proud to be made in the USA
- © 2024 ENTEXS Corporation
