entexs Mini 1

Capacity: 100 lbs per day

ethanol extraction

A complete processing solution from biomass input to crude and/or distillate. Features high-speed batch centrifuge with closed loop extraction routines utilizing ultra-cold temperature ethanol-based solvent enabling complete and high-quality cannabinoid capture without the need for winterization. Multi-stage filtration utilizes both particulate and color remediation with inter-stage pressure sensors and sight glasses for quality feedback.

Closed loop solvent recovery with desolventizing and decarboxylation routines enables full spectrum crude production under vacuum and reduced heat conditions with no need for roto-vaps or vac ovens for final oil processing. The multi-pass distillation module enables crude oil refinement utilizing terp strip and final distillation (2nd pass) routines. Complete system automation enables touch button control with tunable parameters for single-operator control. Closed loop process with integrated heated lines and pumps eliminates open pours and the need for external heat sources such as heat guns, tape, etc.

mini 1

system overview

ENTEXS MINI 1

Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.

High-speed batch centrifuge extraction module with closed loop tincture re-use routines, includes integrated heat exchangers, automated valves, and sensors for touchless control. Post-extraction clean solvent rinse increases extraction efficiencies.

RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.

Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.

Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.

In-Line Sample Test Ports enable direct sampling of substances from within the system while maintaining a vacuum environment.

Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.

Wiped Film (WFE) dual distillation module features a heated feed tank with a metering gear pump, 6" wiped film still with mechanical seal, cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU's maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -70° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.

Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.

mini 1

system overview

ENTEXS MINI 1
A
B
C
D
E
F
G
H
I
A

Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.

B

High-speed batch centrifuge extraction module with closed loop tincture re-use routines, includes integrated heat exchangers, automated valves, and sensors for touchless control. Post-extraction clean solvent rinse increases extraction efficiencies.

C

RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.

D

Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.

E

Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.

F

In-Line Sample Test Ports enable direct sampling of substances from within the system while maintaining a vacuum environment.

G

Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.

H

Wiped Film (WFE) dual distillation module features a heated feed tank with a metering gear pump, 6″ wiped film still with mechanical seal, cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU’s maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -70° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.

I

Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.

entexs

Technologies

Automated Tech

Fully Automated

Extraction carousel with user configured routines and flow control from biomass to full spectrum crude, distillate and/or isolate.

No Winterization Tech

No Winterization

Bypass this extensive and time-consuming step by controlling and maintaining solvent temperature during the extraction process below -50 °C.

Cloud Tech

Cloud Network

From your phone or computer, real-time and trend monitoring of extraction process can be leveraged to optimize efficiency.

Closed Loop Tech

Closed Loop System

Solvent temperature control maintains precise extraction temperature. Combined with our automation, complete control over final product states can be configured and run.

Hands-Free Tech

Hands-Free Technology

No touch process throughout the extraction process eliminates potential reduced efficiencies, compromised quality, increased labor and safety risks.

Heated and Jacketed Lines

Heated and Jacketed Lines

Heated and jacketed lines in extraction systems maintain consistent temperatures, preventing solidification or degradation of sensitive substances. This technology enhances extraction yields, quality, and streamlines operations by eliminating external heating devices

In-line sample test ports

In-Line Sample Test Ports

In-line sample test ports enable direct sampling of substances from within the system while maintaining a vacuum environment. This feature allows for real-time quality checks and process monitoring without disrupting the extraction process or compromising the vacuum conditions, ensuring accuracy and efficiency in product testing.

ENTEXS - Complete Process
entexs

Complete Process

Our systems are designed for optimization on each of your processes.

mini 1

specifications

BATCH RATE

Cooling Method: Low Temp Chiller
Throughput Capacity: Up to 10lb/batch
Temperature Range: -60° for extraction to +200° C for distillate production

ELECTRICAL SPECIFICATIONS

Voltage: 208/230/460V (Configurable at time of order)
Electrical Rating: C1D2 Minimum
Power: 60 kW total

MECHANICAL SPECIFICATIONS

Footprint: 25’W x 6’D x 8’H (total system footprint)
Temperature Rating: -60° to +200° C
Pressure Rating: Full Vacuum to Atm.
Solvent Holding Volume: 55 gal working volume
HMI Interface: Remote Touch Panel
Controller: Industrial PLC UL Listed Components

mini 1

Gallery

Subscribe to our

Newsletter

ENTEXS MINI 1
Ethanol extraction

entexsmini 1

100 lbs per day

ENTEXS MINI 3
Ethanol extraction

entexsmini 3

300 lbs per day

ENTEXS MINI 9
Ethanol extraction

entexsmini 9

900 lbs per day

ENTEXS MINI RMD
Extraction with inline remediation

entexsinline RMD

100-1800 lbs per day

ENTEXS MINI 18 Dual Centrifuge
Ethanol extraction

entexsmini 18

1800 lbs per day

ENTEXS MIDI
Ethanol extraction

entexsmidi

4500 lbs per day

ENTEXS MIDI Industrial
Ethanol extraction

entexsmidi industrial

18000 lbs per day

ENTEXS CWE-50
cold water extraction

entexscwe-50

50 lbs / batch

ENTEXS CWE-100
cold water extraction

entexscwe-100

100 lbs / batch

ENTEXS CWE-200
cold water extraction

entexscwe-200

200 lbs / batch

entexs

Remediation Systems

ENTEXS RMD-T30
Up to 30L / batch

entexsrmd-t30

ENTEXS RMD-T1
70L / batch

entexsrmd-t1

ENTEXS RMD-T70
70L / batch Continous

entexsrmd-t70

ENTEXS RMD-T 200
200L / batch Continous

entexsrmd-t200

ENTEXS RMD-T450
450L / batch Continous

entexsrmd-t450

entexs

Standalone Modules

ENTEXS Terpene
UP TO 300 LBS / DAY

entexsterpene

ENTEXS Crystallizer
UP TO 40 KG / BATCH

entexsCrystallizer

ENTEXS Dual-Pass Distillate
UPTO 10 KG/HR

entexsDistillate