entexs Mini 18

Capacity: 1800 lbs per day

ethanol extraction

A complete processing solution from biomass to crude and/or distillate. Features dual high-speed batch centrifuges with closed-loop extraction routines utilizing ultra-cold temperature ethanol solvent enabling complete and high-quality cannabinoid capture without the need for winterization. Multi-stage filtration utilizes both particulate and color remediation with inter-stage pressure sensors and sight glasses for quality feedback. Closed loop solvent recovery with desolventizing and decarb routines enables full spectrum crude production under vacuum and reduced heat conditions with no need for roto-vaps or vac ovens for final oil processing.

Dual pass distillation module enables crude oil refinement utilizing terp strip and final distillation routines. Complete system automation enables touch button control with tunable parameters for single-operator control. A closed loop process with integrated heated lines and pumps eliminates open pours and the need for external heat sources such as heat guns, tape, etc.

mini 18

system overview

ENTEXS MINI 18 Dual Centrifuge

Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.

Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.

Dual high-speed batch centrifuge extraction module with closed loop tincture re-use routines includes integrated heat exchangers, automated valves, and sensors for touchless control. post-extraction clean solvent rinse increases extraction efficiencies

Particulate & color remediation module filters cold extract directly from extraction, eliminating the need for winterization. Staged sight glasses allow product quality to be observed and maintained at all times.

RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.

Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.

Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.

Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.

Wiped Film (WFE) dual-pass distillation module features a heated feed tank with metering gear pump, 6" wiped film still with mechanical seal, dual cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU's maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -80° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.

Dedicated distillation control interface allows automated hands-free distillation control at point of use with real-time performance feedback.

mini 18

system overview

ENTEXS MINI 18 Dual Centrifuge
A
B
C
D
E
F
G
H
I
J
A

Jacketed & insulated holding tanks allow cold solvent and tincture temps to be maintained while reducing system energy consumption.

B

Dedicated C1D2 HMI control interface allows automated hands-free extraction control at the point of use for precise, repeatable extractions with real-time performance feedback.

C

Dual high-speed batch centrifuge extraction module with closed loop tincture re-use routines includes integrated heat exchangers, automated valves, and sensors for touchless control. post-extraction clean solvent rinse increases extraction efficiencies

D

Particulate & color remediation module filters cold extract directly from extraction, eliminating the need for winterization. Staged sight glasses allow product quality to be observed and maintained at all times.

E

RFE (Rising Film) & FFE (Falling Film) evaporator enables bulk solvent evaporation under vacuum at reduced temperatures to maintain product quality and profile.

F

Desolventizing reactor vessels remove residual solvent and enable in-place decarb routines for true hands-free processing to a full spectrum crude final product. Dual vessels enable continuous extraction capability eliminating the need for rotovaps.

G

Jacketed & heated lines enable product transfer without the need for heat guns or other manual heating needs.

H

Stainless steel drip trays under interface points to contain any product spills and allow for easy cleaning and product recovery.

I

Wiped Film (WFE) dual-pass distillation module features a heated feed tank with metering gear pump, 6″ wiped film still with mechanical seal, dual cold traps for complete light volatile recovery, and mtorr high vacuum system complete with diffusion and roughing pumps. TCU’s maintain precise temperature control of WFE jacket up to 200° C, inner condenser temp up to 130° C and cold trap temps down to -80° C. Residue and distillate offtake pumps allow continuous hands-free processing to distillate.

J

Dedicated distillation control interface allows automated hands-free distillation control at point of use with real-time performance feedback.

ENTEXS - Complete Process
entexs

Complete Process

Our systems are designed for optimization on each of your processes.

mini 18

specifications

BATCH RATE

Batch Size: up to 35 lbs
Throughput Capacity: 1800 lbs per day
Temperature Range: Configurable down to -60C 

ELECTRICAL SPECIFICATIONS

Voltage: 208 / 240 / 480 (configurable)
Power: 60 kW (not including chiller)
Electrical Rating: Class 1 Div 2
MINIMUM ELECTRICAL RATING

MECHANICAL SPECIFICATIONS

Footprint: 30’ W x 7’ D x 10’ H (TOTAL SYSTEM FOOTPRINT)
Temperature Rating: -60 to 200 C
Pressure Rating: Vacuum to 50 PSIG
Solvent Holding Volume: 110 gallons
HMI Interface: Dual 24 Inch Touch Panel (C1D2 rated)
Controller: FPGA Industrial Controller w/ Watchdog (C1D2 rated)

SYSTEM MODULES

  • Batch reactor
  • Solvent Storage Tank (Insulated)
  • Tincture Storage Tank (Insulated)
  • Mag drive recirc pumps
  • Heat exchangers
  • Filtration Skid (particulate and color remediation)
  • Evaporation and Distillation Skid
  • Rising Film evaporator
  • Falling Film evaporator
  • Dual-stage WFE w/ short path distillation
  • HTF support system
  • Mag drive gear pumps
  • Valves (manual and pneumatic)
  • High Vac (mtorr) system w/ diffusion pump
  • Cold trap
mini 18

Gallery

Subscribe to our

Newsletter

entexs

Extraction Platform

ENTEXS MINI 1
Ethanol extraction

entexsmini 1

100 lbs per day

ENTEXS MINI 3
Ethanol extraction

entexsmini 3

300 lbs per day

ENTEXS MINI 9
Ethanol extraction

entexsmini 9

900 lbs per day

ENTEXS MINI 18 Dual Centrifuge
Ethanol extraction

entexsmini 18

1800 lbs per day

ENTEXS MIDI
Ethanol extraction

entexsmidi

4500 lbs per day

ENTEXS MIDI +
Ethanol extraction

entexsmidi + industrial

18000 lbs per day

ENTEXS CWE-50
cold water extraction

entexscwe-50

50 lbs / batch

ENTEXS CWE-100
cold water extraction

entexscwe-100

100 lbs / batch

ENTEXS CWE-200
cold water extraction

entexscwe-200

200 lbs / batch

entexs

Remediation Systems

ENTEXS RMD-T30
Up to 30L / batch

entexsrmd-t30

ENTEXS RMD-T1
70L / batch

entexsrmd-t1

ENTEXS RMD-T70
70L / batch

entexsrmd-t70

ENTEXS RMD-T 200
200L / batch

entexsrmd-t200

ENTEXS RMD-T450
450L / batch

entexsrmd-t450

entexs

Standalone Modules

ENTEXS Terpene
UP TO 300 LBS / DAY

entexsterpene

ENTEXS Crystallizer
UP TO 40 KG / BATCH

entexsCrystallizer